Clean the Laminator
Clean the laminator when at least one laminator cartridge is loaded with holographic overlay
material and any of the following are true:
Particles appear on the laminated cards.
Particles are visible inside the laminator.
For examples of problems that require laminator cleaning, refer to "Laminator Problems" on
page
55.
This procedure uses a double‐sided, sticky cleaning card that removes holographic
overlay particles from the laminator. When you clean the CD system using a regular
cleaning card, the card also moves into the laminator and cleans the laminator
rollers, the card entry area, and the impresser exit rollers. This is sufficient if you are
not using holographic overlay. Refer to "Run a Cleaning Card" on page
1.
Unlock the laminator access door and remove the L1 and L2 laminator cartridges.
2.
Remove printed cards from the output hopper, if necessary.
CD800 Card Printer User's Guide
32.
A-13