Settings & Registrations
5.5 Advanced settings for DSC/WKR
The following describes the procedure for the advanced DSC settings such as automatic
acknowledgement, as well as setting the watch frequency of the watch keeping receiver.
hierarchical menus, select 7.5 DSC/WKR
The following describes the procedures from
this screen. Note that the screen at right
shows factory default settings.
If any one of the individual calls below is received when the automatic acknowledgement is set to
ON and no menu is displayed, the acknowledgement is sent automatically without notice.
Safety - a test call
Safety - a position request call
Routine - a polling call
Move the cursor to 1. Automatic ACK,
and press ENT.
The screen as shown at right is displayed.
Set the call setting targeted for
automatic acknowledgement to ON.
key, and through
2.WKR scanning FRQ
3.Safety/Routine alarm :ON
5.Group ID : [0
2.Position RQ call :ON