Printer (Nkg-91) - JRC JSS-2250 Instruction Manual

10.3 Printer (NKG-91)

The thermal head of the NKG-91 printer may be very hot after printing. Do
not touch the thermal head of the printer.
is cool before replacing the paper or cleaning the thermal head.
The paper used in the NKG-91 printer is heat sensitive. Take the following
precautions when using this paper.
・
Store the paper away from heat, humidity, or heat sources.
・
Do not rub the paper with any hard objects.
・
Do not place the paper near organic solvents.
・
Do not allow the paper to come in contact with polyvinyl chloride film,
erasers, or adhesive tape for long periods of time.
・
Keep the paper away from freshly copied diazo type or wet process copy
paper.
1
2
3
■
Loading the printer paper
1 1 . .
1 .
Press the paper cover open button.
The paper cover will open.
2 2 . .
2 .
Insert the paper as shown in the diagram at
right.
Position the paper such that the leading edge
extends outside the printer, and press both
sides of the paper cover to close it.
Note
The printer will be turned on and off simultaneously with the equipment.
CAUTION
1.
2.
3.
■
Options Operation
Make sure that the thermal head
Paper cover open button
Paper cutter
Paper cover
10-5