Popup Screens - JRC JSS-2250 Instruction Manual

Operation

4.9 Popup screens

(１ ) Popup screens of the controller
The contents of the popup screens of the controller are as follows (in alphabetical order).
Message
Access denied
Another controller is currently in use.
Attention
DISTRESS stopped by another unit.
Attention
Failed to send the DSC message.
Attention
In principle, the ACK should be sent by a
coast station.
Attention
Left without operating.
The menu will be closed automatically,
soon...
Attention
No DTE available.
Attention
Normally, the relay call should be sent to a
coast station.
Attention
Now continuing the distress call mode.
Break this mode?
Attention
Resending the distress call soon...
Attention
Restart the system to use the DTE.
Attention
Tuning the antenna to the frequency now.
Wait a moment, please.
Channel/frequency dial operation is invalid
right now.
To enable it, press FUNC, and ENT.
Data sending...
4-82
Buttons
Cannot obtain the access right
OK because another controller is
currently in use.
Stopped the distress alert by another
OK
unit such as DMC.
Cannot send DSC message for some
OK
reason.
In principle, distress
acknowledgement is sent by coast
Continue/ Cancel
station.
Continue: Continues the operation.
Cancel:
This process will be canceled and
returns to the status display
Cancel condition because the controller has
been left for 10min without operating.
Cancel:
On the interval period of the distress
call specifying the FEC mode, the
OK
distress key have been pressed at
the controller connecting no DTE.
Normally, DSC distress relay
acknowledgements are sent to a
Continue/ Cancel/
coast station.
OK*
Continue: Continues making call.
(*drobose call only)
Cancel:
OK:
Pressed the CANCEL key during the
distress call mode. Is it ok to break?
Continue/ Break Continue: Continues the distress
Break:
DSC resends the distress call
automatically soon.
Cancel
Cancel:
When setting the menu 7.6 Option to
OK connect the data terminal, restart the
system to
Tuning the antenna.
-----
Wait a moment.
The channel operation with the jog
dial is disabled right now. To enable
-----
it, press the FUNC key and ENT in
order.
Updating user channel information on
other controller using the Data
Cancel
transfer menu.
Cancel:
Description
Cancels this operation.
Cancels the shutdown.
Stop making call.
Continues making call.
mode.
Breaks the distress mode.
Shows the confirmation
popup for the distress
mode termination.
Cancels update.