JRC JSS-2250 Instruction Manual page 72

Operation
- The function keys available for the edit screen and the content are as follows.
Note
Group 1
●
・ F1 ： Insert On/Off ···············
・ F2 ： Ins_Line ·····················
・ F3 ： Block ··························
・ F4 ： Del_Word ····················
・ F5 ： Del_Line ·····················
・ F6 ： （ N/A）
・ F7 ： Quit ····························
・ F8 ： Save As ······················
・ F9 ： Save & Quit ················
・ F10 ： - Others - ····················
Group 2
●
・ F1 ： Max Column ················
・ F2 ： Set Tab ·······················
・ F3 ： Undo_Char ·················
・ F4 ： Undo_Word ·················
・ F5 ： Undo_Line ··················
・ F6 ： Merge File ··················
・ F7 ： Find ···························
・ F8 ： Print_out ·····················
・ F9 ： Find/Replace ···············
・ F10 ： - Others - ····················
4-22
Sets the input condition to the insert mode by
pressing it while Insert On is displayed. And sets the
input condition to the overwrite mode by pressing it
while Insert Off is displayed. Current conditions are
indicated on the upper-right corner of the screen.
Add a line to the line of the cursor position.
Indicates the following block menu.
・ Top-marker of block:
Specifies the cursor position for a starting point
of the block.
・ Bottom-marker of block:
Specifies the cursor position for a ending point
of the block.
・ Remove markers:
Releases the specification of the block.
・ Copy Block:
Copies and pastes the character string specified
in the block onto the cursor position.
・ Move block:
Moves the character string specified in the block
to the line position of the cursor.
・ Delete block:
Deletes the character string specified in the
block.
・ Go to the block:
Moves the cursor to the starting point of the
block.
Deletes the word at the cursor position.
Deletes the line at the cursor position.
Finishes editing without saving the message file.
Saves the message file with the new name.
Saves the message file by overwriting and finishes
editing.
Assigns the group 2 to the function keys.
Specifies the column width of a line.
Specifies the tab position on the edit screen.
Insert the character erased at the end to the cursor
position.
Insert the word erased with F4 Del_Word to the
cursor position.
Insert the line erased with F5 Del_Line to the line of
the cursor position.
Selects an existing message file to merge to the
message file under the edit.
Searches a specified character string.
Prints the message file under the edit.
Searches a specified character string and replaces it
with another character string.
Assigns the group 1 to the function keys.