Settings & Registrations - JRC JSS-2250 Instruction Manual

5. SETTINGS & REGISTRATIONS
This chapter describes the procedures for settings and registrations such as manual date
and time settings, registration of channels in each mode, advanced DSC settings, printer
settings, and other settings for the equipment.
5.1 Date and time settings
Normally, the date and time are updated automatically if importing GPS information. But, if
necessary, input these parameters manually as follows.
The time in the 7.1 Date & time menu means the present time, and is
different from the time in the 7.2 POS/TIME menu that means the time
when the position information is valid.
■ ■
Procedure
1 1 . .
1 .
Press the
MENU
hierarchical menus, select 7.1 Date &
time.
2 2 . .
2 .
To input the date, press ENT.
Input the year, month, and date with the
numeric keypad or jog dial, and press ENT.
3 3 . .
3 .
After completing the above steps, the
cursor moves to 2. Present time.
CAUTION
key, and through
Settings & Registrations
7.1)Date & time
1.Date :2008-12-31
2.Present time :23:59
3.Display form
- UTC/LT :UTC
:
- LT diff :
0.Back
7.1)Date & time
1.Date :2008 -12-31
2.Present time :23:59
3.Display form
- UTC/LT :UTC
:
- LT diff :
0.Back
7.1)Date & time
1.Date :2008-12-31
2.Present time :23:59
3.Display form
- UTC/LT :UTC
:
- LT diff :
0.Back
5-1