JRC JSS-2250 Instruction Manual page 138

Operation
Message
Formatting the USB memory.
Please wait.
Now printing.
Please wait.
Now reading data.
Please wait.
Now processing NBDP settings.
Please wait.
Now saving data.
Please wait.
Really quit without saving?
Replace the string?
String not found.
The USB drive is installed and ready to use.
The USB memory
removed from the DTE.
The USB memory format complete.
There are no data to be restored.
To stop the USB drive, choose Yes. After
the USB drive is stopped, the USB drive
can be safely removed.
Waiting for the tuner answer...
Warning
The USB memory was removed without
unmounting that drive.
4-88
can now be safely
Buttons
USB memory is being formatted.
-----
Wait for a while.
It is printing.
-----
Wait for a while.
Information on the file and the folder
-----
is being read. Wait for a while.
The NBDP setting information is now
-----
being read or saved. Wait for a while.
-----
It is saving a file. Wait for a while.
Is it OK to quit without saving?
Yes/ No
Yes:
No:
Continue to replace the strings
specified?
Yes/ No
Yes:
No:
The data terminal cannot find the
OK
string searching.
OK Recognized the USB memory.
Unmounting the USB drive was
OK
completed.
The format of USB memory was
OK
completed.
There are no data to be restored and
OK
Undo is invalid.
Select Yes when you unmount the
Yes/ No
USB drive. After unmounting, USB
memory can be removed.
Now waiting for the answer from the
-----
antenna tuner. Just a moment,
please.
Removing the USB memory without
OK
unmounting may cause the
malfunction of the USB memory.
Description
Quits immediately
Returns to the editor.
Replacing.
Cancels this operation.