Warm Milk And Milk Foam - Jura J90 Instructions For Use Manual

Warm milk and milk
foam
T Place a glass under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
T Press the
'Latte macchiato'
'Latte macchiato', the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
E There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in program-
ming mode (see Chapter 4 'Permanent settings in program-
ming mode – Product settings').
Coffee preparation starts. The preset amount of water for
espresso flows into the glass. Preparation stops automati-
cally. 'Please select product:'
To ensure that the cappuccino frother always works properly,
you must clean it daily when you have been preparing milk (see
Chapter 5 'Maintenance – Cleaning the cappuccino frother').
Example: Proceed as follows to prepare milk foam.
Precondition: Milk is connected to the cappuccino frother.
T Place a cup under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
E If you want to heat the milk turn the setting wheel of the cap-
puccino frother to the Milk position z.
T Press the
'1 portion milk'
'1 portion milk'
As soon as the machine has heated up,
uct:' appears.
T Press the
'1 portion milk'
'1 portion milk', the milk foam is prepared. Preparation stops
automatically when the preset amount of milk is reached.
'Please select product:'
button.
appears on the display.
button.
'Please select prod-
button again.
appears on the display.
2 Preparation
17