Jura IMPRESSA J9 One Touch Instructions For Use Manual

Jura IMPRESSA J9 One Touch Instructions For Use Manual

Hide thumbs Also See for IMPRESSA J9 One Touch:

Advertisement

IMPRESSA J9 One Touch Instructions for Use
The Instructions for Use has been awarded the seal of
approval by the independent German Technical Inspection
Agency, TÜV SÜD, due to its easy-to-understand style, its
thoroughness and coverage of safety aspects.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IMPRESSA J9 One Touch and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Jura IMPRESSA J9 One Touch

  • Page 1 IMPRESSA J9 One Touch Instructions for Use The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.
  • Page 2: Table Of Contents

    Table of contents Your IMPRESSA J9 One Touch IMPORTANT SAFEGUARDS Control elements Important information Proper use ..............................10 For your safety ..............................10 1 Preparing and using for the first time JURA on the Internet ............................ 13 Setting up the machine ..........................13 Filling the water tank ...........................
  • Page 3 Prompt to take action. This symbol means that you are being prompted to perform some action. Information and tips to make it even easier to use your IMPRESSA. References to the JURA website, which provides further information that may be of interest to you: www.jura.com COFFEE READY...
  • Page 4: Important Safeguards

    Important Safeguards IMPORTANT SAFEGUARDS These safeguards apply for machines with UL safety test (see rating plate and chapter 9, ‘Technical data’). Follow the basic safety When using electrical appliances, basic safety precautions should precautions always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Read all instructions.
  • Page 5 Important Safeguards Special cord set instructions a. A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a long cord. Your IMPRESSA has a 3-pin grounded plug. b. Longer extension cords are available and may be used if care is exercised in their use.
  • Page 6 Important Safeguards Keep your hands and the cord away from hot parts of the appliance during operation. Never clean with scouring powders or hard implements. NEVER DO Never fill instant coffee, chocolate mix etc. into the grinder or (or you will void your ground coffee funnel (grinder by-pass).
  • Page 7 Important Safeguards...
  • Page 8: Control Elements

    Control elements Control elements Figure: IMPRESSA J9 One Touch Chrome Bean container cover Filler funnel for preground coffee Water tank cover Grinder adjustment switch Bean container with aroma Storage compartment cover preservation cover Storage compartment with measuring Water tank spoon for preground coffee, hot-water...
  • Page 9 Control elements On/Off button Display Rotary Switch Ristretto button Maintenance button Espresso button Coffee button Hot Water button Milk button Latte Macchiato button Cappuccino button © The Connector System permits the use of different cappuccino frothers. These are available from stockists.
  • Page 10: Important Information

    The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the conse- quences of improper use.
  • Page 11 IMPRESSA. Further technical data is provided in these instructions for use (see Chapter 9 ‘Technical data’). Please only use original JURA maintenance products. Use of products that are not explicitly recommended by JURA could damage the IMPRESSA.
  • Page 12 Important information People, including children, who do not have the physical, sensory or mental capabilities to use the machine safely or are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly.
  • Page 13: Preparing And Using For The First Time

    JURA on the Internet Visit us on the Internet. You can download short operating instructions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your IMPRESSA and on every aspect of coffee.
  • Page 14: First-Time Use

    T Place a receptacle under the cappuccino frother. c T Press the Maintenance button. , the system fills up with water. The oper- SYSTEM FILLS ation stops automatically and WELCOME TO JURA appears on the display. HEATING UP , the Maintenance button c lights up. PRESS RINSE T Place a receptacle under the coffee spout.
  • Page 15: Inserting And Activating The Filter

    1 Preparing and using for the first time Inserting and activating Your IMPRESSA no longer has to be descaled if you are using the the filter CLARIS Blue filter cartridge. Perform the ‘inserting the filter’ operation without any inter- ruptions. This will ensure that your IMPRESSA always produces its best.
  • Page 16: Determining And Adjusting The Water Hardness

    1 Preparing and using for the first time You can interrupt rinsing of the filter at any time by pressing any button. Press the Maintenance button c to continue rins- ing of the filter. The water may be slightly discoloured. This is not harmful to health and does not affect the taste.
  • Page 17: Adjusting The Grinder

    1 Preparing and using for the first time k T Press the Rotary Switch to enter the programme item. 16°dH g T Turn the Rotary Switch until is displayed. 25°dH k T Press the Rotary Switch to confirm the setting. appears briefly on the display.
  • Page 18: Preparation

    2 Preparation 2 Preparation You can stop preparation of a speciality coffee, milk speciality or hot water at any time. Just press any button. Before and during the grinding operation you can select the coffee strength of individual products: extra-mild ( ), mild ö...
  • Page 19: Latte Macchiato, Cappuccino

    2 Preparation Latte macchiato, Your IMPRESSA can prepare a latte macchiato or cappuccino at the cappuccino touch of a button. There is no need to move the glass or cup. Example: Proceed as follows to prepare one latte macchiato. Use the short spout for a latte macchiato glass and the long spout for a cappuccino cup.
  • Page 20: Hot Milk And Milk Foam

    2 Preparation Hot milk and milk foam This chapter applies to the Professional and Easy Cappuccino Frothers. Example: Proceed as follows to prepare milk foam. T Attach the milk pipe to the cappuccino frother. Use the long pipe for a milk carton and the short pipe for a milk con- tainer.
  • Page 21: Permanently Setting The Amount Of Water For The Cup Size

    2 Preparation The desired speciality coffee must be prepared within approx- imately one minute after filling with the preground coffee. Otherwise the IMPRESSA stops the operation and is once more ready for use. All speciality coffees with preground coffee are prepared following this model.
  • Page 22: Hot Water

    2 Preparation Example: Proceed as follows to permanently set the amount of water for one coffee. Precondition: is displayed. COFFEE READY T Place a cup under the coffee spout. o T Press and hold the Coffee button. and the coffee strength is displayed. 1 COFFEE T Hold the Coffee button down until ENOUGH COFFEE?
  • Page 23 2 Preparation T Place a cup under the hot-water nozzle. T Press the Hot Water button. The temperature is displayed. By touching the Hot Water button several times ( within approximately 2 seconds) you can set the temperature to your individual preference. This setting is not saved. , hot water flows into the cup.
  • Page 24: Daily Operation

    Precondition: Your IMPRESSA is switched on at the power switch. T Place a receptacle under the coffee spout. Q T Press the On/Off button to switch the IMPRESSA on. appears on the display. WELCOME TO JURA HEATING UP , the Maintenance button c lights up. PRESS RINSE c T Press the Maintenance button.
  • Page 25: Switching Off

    3 Daily operation Switching off When you switch your IMPRESSA off, the spouts used to prepare a speciality coffee are rinsed. T Place a receptacle under the coffee spout and another under the cappuccino frother. T Press the On/Off button. , the spouts used to prepare a spe- MACHINE RINSING ciality coffee or milk are rinsed.
  • Page 26: Permanent Settings In Programming Mode

    4 Permanent settings in programming mode 4 Permanent settings in programming mode You can make permanent settings in programming mode. You can navigate through the programme items and permanently save the required settings simply by turning and pressing the Rotary Switch. You can make the following settings with the Rotary Switch: Programme item Sub-item...
  • Page 27: Products

    4 Permanent settings in programming mode Programme item Sub-item Explanation T Keep track of all prepared INFORMATION speciality coffees and milk specialities and view the maintenance status. T Select the unit for the SETTINGS amount of water. T Adjust the brightness of the SYMBOL BRIGHTNESS BRIGHTNESS symbols.
  • Page 28 4 Permanent settings in programming mode Permanent settings in programming mode always follow the same model. Example: Proceed as follows to change the amount of milk for a latte macchiato from , the amount of 16 SEC 20 SEC water from and the interval from 45 ML 40 ML...
  • Page 29: Energy-Saving Mode

    4 Permanent settings in programming mode k T Press the Rotary Switch to confirm the setting. appears briefly on the display. CONFIRMED PAUSE 20 SEC g T Turn the Rotary Switch until is displayed. EXIT k T Press the Rotary Switch to exit the programme item. SELECT PRODUCT g T Turn the Rotary Switch until is displayed.
  • Page 30: Automatic Switch-Off

    4 Permanent settings in programming mode k T Press the Rotary Switch to confirm the setting. appears briefly on the display. CONFIRMED ECONOMY MODE - g T Turn the Rotary Switch until is displayed. EXIT k T Press the Rotary Switch to exit programming mode. COFFEE READY Automatic switch-off By instructing your IMPRESSA to automatically switch itself off, you...
  • Page 31: Restore Factory Settings

    4 Permanent settings in programming mode CAPP RINSE AFTER 10' You are prompted to perform a cappuccino rinse 10 minutes after preparation of a milk product. CAPP RINSE NOW You are prompted to perform a cappuccino rinse immedi- ately after preparation of a milk product. Example: Proceed as follows to make the machine prompt you to perform the cappuccino rinse immediately after preparing a milk product.
  • Page 32: Viewing Information And Maintenance Status

    4 Permanent settings in programming mode ALL PRODUCTS The settings (amount of water, aroma, temperature etc.) for all products are reset to the factory settings. RESET ALL All customer settings are reset to the factory settings. Your IMPRESSA then switches off. Example: Proceed as follows to reset the values for ‘Espresso’...
  • Page 33: Unit For Amount Of Water

    4 Permanent settings in programming mode Precondition: is displayed. COFFEE READY k T Press and hold the Rotary Switch until MAINTENANCE appears. g T Turn the Rotary Switch until is dis- INFORMATION played. k T Press the Rotary Switch to enter the programme item. , the total number of prepared speciality coffees TOTAL and milk specialities is displayed.
  • Page 34: Brightness Of Symbols

    4 Permanent settings in programming mode Brightness of symbols You can individually adjust the brightness of the symbols. Precondition: is displayed. COFFEE READY k T Press and hold the Rotary Switch until MAINTENANCE appears. g T Turn the Rotary Switch until SYMBOL BRIGHTNESS displayed.
  • Page 35: Maintenance

    5 Maintenance 5 Maintenance Your IMPRESSA has the following integrated maintenance pro- grammes: Cleaning the cappuccino frother Rinsing the cappuccino frother Changing the filter Cleaning the machine Rinsing the machine Descaling the machine Clean or descale the machine or change the filter when the display prompts you to do so.
  • Page 36: Cleaning The Cappuccino Frother

    CAUTION If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. Use only original JURA maintenance products. JURA Cappuccino Cleaner is available from stockists. Precondition: is displayed. COFFEE READY...
  • Page 37: Dismantling And Rinsing The Professional Cappuccino Frother

    5 Maintenance T Place another receptacle under the cappuccino frother. c T Press the Maintenance button. , the cappuccino frother and CAPPUCCINO CLEANS the pipe are cleaned. WATER FOR CAPPUCCINO T Rinse the receptacle thoroughly, fill it with 250 ml of fresh water and immerse the milk pipe in the water.
  • Page 38: Changing The Filter

    5 Maintenance Changing the filter After 50 litres of water have flowed through, the filter will cease to work. Your IMPRESSA will automatically prompt you to change the filter. After two months, the filter will cease to work. You can check the elapsed time by referring to the date plate on the filter holder in the water tank.
  • Page 39: Cleaning The Machine

    Use only original JURA maintenance products. The cleaning programme lasts approximately 20 minutes. Do not interrupt the cleaning programme. The quality of cleaning will be impaired if you do so. JURA cleaning tablets are available from stockists. Precondition: is dis- COFFEE READY CLEAN MACHINE played and the Maintenance button c lights up.
  • Page 40: Descaling The Machine

    The operation is interrupted, ADD TABLET T Open the cover of the filler funnel for preground coffee. T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. , the Maintenance but- ADD TABLET PRESS RINSE ton c lights up.
  • Page 41 SOLVENT IN TANK T Remove and empty the water tank. T Completely dissolve the contents of one blister (three JURA descaling tablets) in a receptacle holding 500 ml of water. This may take several minutes.
  • Page 42 5 Maintenance T Place a receptacle (at least 500 ml) under the Connector Sys- © c T Press the Maintenance button. DECALCS © This causes water to flow out of the Connector System several times. The Maintenance button c flashes during the descaling operation.
  • Page 43: Cleaning The Bean Container

    5 Maintenance Cleaning the bean Coffee beans may be covered with a slight oil film which remains on container the walls of the bean container. These traces may negatively affect the coffee result. For this reason clean the bean container from time to time.
  • Page 44: Display Messages

    6 Display messages 6 Display messages Message Cause/Result Action T Fill the water tank (see The water tank is empty. You FILL WATER TANK cannot prepare any products. Chapter 1 ‘Preparing and using for the first time – Filling the water tank’).
  • Page 45 6 Display messages Message Cause/Result Action T Perform descaling (see The IMPRESSA is prompting COFFEE READY you to descale it. Chapter 5 ‘Maintenance – Des- DECALCIFY MACHINE caling the machine ’). COFFEE READY DECALCIFY NOW T Replace the CLARIS Blue filter The filter cartridge no longer COFFEE READY works.
  • Page 46: Troubleshooting

    Grinder is making a very loud There are foreign objects in noise. the grinder. your country (see Chapter 11 ‘JURA contact details / Legal information’). T Warm the machine at room is displayed. If the machine was exposed ERROR 2 to the cold for a long period temperature.
  • Page 47 Contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal informa- tion’). If you were unable to solve the problem, contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’).
  • Page 48: Transport And Environmentally Friendly Disposal

    8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Transport / Emptying In order to protect the IMPRESSA from frost during transport, the the system system must be emptied. Precondition: is displayed. COFFEE READY T Carefully pull the cappuccino frother off the Connector Sys- ©...
  • Page 49: Technical Data

    9 Technical data 9 Technical data Voltage 220–240 V ~, 50 Hz 120 V ~, 60 Hz 220–240 V ~, 50 Hz 220 V ~, 50 Hz Power 1450 W S F D G Safety test Energy consumption Approx. 5 Wh SAVE YES Energy consumption Approx.
  • Page 50: Index

    Index 10 Index Contact details 52 Addresses 52 Cup platform 8 Automatic switch-off 30 Customer support 52 Bean container 8 Degree of water hardness 16 Descaling Bean container with aroma preservation Machine 40 cover 8 Water tank 43 Cleaning 43 Determining and adjusting the water Filling 13 hardness 16...
  • Page 51 Index Language 34 Products 27 JURA Restore factory settings 31 Contact details 52 Rinses 30 Internet 13 Unit for amount of water 33 Proper use 10 Language 34 Latte macchiato 19 Rinses 30 Rinsing Machine Cappuccino frother 35 Cleaning 39...
  • Page 52: Jura Contact Details / Legal Information

    2005/32/EC – Ecodesign Technical changes We reserve the right to make technical changes. The illustrations in these instructions for use show the IMPRESSA J9 One Touch Chrome model. Some details of your IMPRESSA may vary. Feedback Your opinion is important to us! Use the contact link at www.jura.com.

Table of Contents