Warm Milk And Milk Foam; Ground Coffee - Jura IMPRESSA Z9 One Touch TFT Instructions For Use Manual

2 Preparation
Warm milk and milk
foam

Ground coffee

20
Coffee preparation starts. The preset amount of water for
espresso flows into the glass.
Preparation stops automatically.
appears on the display.
To ensure that the cappuccino frother always works properly, you
must clean it daily when you have been preparing milk (see Chap-
ter 5 'Maintenance – Cleaning the cappuccino frother'). Your
IMPRESSA will not prompt you to clean the cappuccino frother.
Example: Proceed as follows to prepare hot milk at the touch of a
button.
Precondition: 'Please select product:'
to the cappuccino frother.
T Place a cup under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
position z.
E If you want to prepare milk foam, turn the setting wheel of
the cappuccino frother to the Milk Foam position ü.
T Press the '1 portion milk'
The hot milk is prepared. The preset amount of milk flows
into the cup.
Preparation stops automatically.
appears on the display.
To ensure that the cappuccino frother always works properly, you
must clean it daily when you have been preparing milk (see Chap-
ter 5 'Maintenance – Cleaning the cappuccino frother'). Your
IMPRESSA will not prompt you to clean the cappuccino frother.
You can choose to use a second coffee variety, for example decaf-
feinated coffee, with the filter funnel for ground coffee.
E Never add more than two level measuring spoons of ground
coffee.
E Use ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
'Please select product:'
is displayed. Milk is connected
button.
'Please select product:'