Latte Macchiato, Cappuccino; Warm Milk And Milk Foam - Jura IMPRESSA XJ9 Professional Instructions For Use Manual

2 Preparation
Latte macchiato,
cappuccino
Warm milk and milk
foam
18
Your IMPRESSA can prepare a latte macchiato or cappuccino at the
touch of a button. There is no need to move the glass or cup.
Example: Proceed as follows to prepare one latte macchiato.
Precondition: 'Please select product:'
to the cappuccino frother.
T Place a glass under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
T Press the 'Latte macchiato'
'Latte macchiato', the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
E There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in program-
ming mode (see Chapter 4 'Permanent settings in program-
ming mode – Product settings').
Coffee preparation starts. The preset amount of water flows
into the glass. Preparation stops automatically.
product:' appears on the display.
To make sure the cappuccino frother always works properly, you
must rinse and clean it regularly (see Chapter 5 'Maintenance – Rin-
sing the cappuccino frother').
Example: Proceed as follows to prepare milk foam.
Precondition: 'Please select product:'
to the cappuccino frother.
T Place a cup under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
E If you want to heat the milk turn the setting wheel of the cap-
puccino frother to the Milk position z.
is displayed. Milk is connected
button.
'Please select
is displayed. Milk is connected