Preparation
Warm milk and milk
foam
Ground coffee
Coffee preparation starts. The preset amount of water flows
into the glass. Preparation stops automatically.
product:'
appears on the display.
To make sure the cappuccino frother always works properly, you
must rinse and clean it regularly (see Chapter 'Maintenance – Rins-
ing the cappuccino frother').
Example: Proceed as follows to prepare milk foam.
Precondition: 'Please select product:'
to the cappuccino frother.
T Place a cup under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
E If you want to heat the milk turn the setting wheel of the cap-
puccino frother to the Milk position z.
T Press the
' portion milk'
The machine heats up.
' portion
milk', the milk foam is prepared. Preparation stops
automatically when the preset amount of milk foam is
reached.
'Please select product:'
To make sure the cappuccino frother always works properly, rinse
and clean it regularly (see Chapter 'Maintenance – Rinsing the cap-
puccino frother').
You can choose to use a second coffee variety, for example decaf-
feinated coffee, with the filter funnel for ground coffee.
E Never add more than two level measuring spoons of ground
coffee.
E Use ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
E If you did not fill the machine with a sufficient amount of
ground coffee,
the IMPRESSA stops the operation.
is displayed. Milk is connected
button.
appears on the display.
'Not enough ground coffee'
'Please select
is displayed and