Maintenance Settings - Jura J90 Instructions For Use Manual

Maintenance settings

T Press the
'Volume'
T Press the
' < '
ume to '40 ml'.
T Press the
'Save'
'Saved' appears briefly on the display.
T Press the
'Next'
T Press the
'Interval'
T Press the
' < '
to '40 sec.'.
T Press the
'Save'
'Saved' appears briefly on the display.
'Latte macchiato'
O T Press the P button to exit programming mode.
'Please select product:'
In the programme item
the following settings:
U
'Filter'
U
Activate the CLARIS Blue filter cartridge (see Chapter 1 'Pre-
paring and using for the first time – Inserting and activating
the filter').
U
'Water hardness'
U
If you do not have a filter cartridge, you will need to set the
water hardness (see Chapter 1 'Preparing and using for the
first time – Setting the water hardness').
U
'Switch-on rinse'
U
The switch-on rinse must be started manually.
U
'Switch-on rinse'
U
The switch-on rinse is started automatically.
U
'Rinse the milk system'
U
You are prompted to rinse the milk system 10 minutes after
preparation of a speciality coffee with milk.
U
'Rinse the milk system'
U
You are prompted to rinse the milk system immediately
after preparation of a speciality coffee with milk.
4 Permanent settings in programming mode
button.
or ' > ' button to change setting for the fill vol-
button.
button.
button.
or ' > ' button to change setting for the interval
button.
'Maintenance settings (3/6)'
/ 'Manual'
/ 'Automatic'
/ 'After 10 min.'
/ 'Immediate'
you can make
25