Warm Milk And Milk Foam - Jura IMPRESSA Z7 Instructions For Use Manual

2 Preparation
Warm milk and milk
foam
18
E There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in program-
ming mode (see Chapter 4 'Permanent settings in program-
ming mode – Products').
1 LATTE MAC.
The preset amount of water flows into the cup. Preparation
stops automatically and
play. Then
COFFEE READY
To make sure the cappuccino frother always works properly, rinse
and clean it regularly (see Chapter 5 'Maintenance – Rinsing the
cappuccino frother').
Example: Proceed as follows to prepare milk foam.
T Attach the milk pipe to the cappuccino frother. Use the long
pipe for a milk carton and the short pipe for the milk con-
tainer.
T Insert the other end of the milk pipe into a milk carton/bot-
tle or connect it to the milk container.
T Place a cup under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam 5 position.
E If you want to heat the milk turn the setting wheel of the cap-
puccino frother to the Milk z position.
z T Press the Milk button.
, the milk foam is prepared. Preparation stops auto-
1 MILK
matically and
To make sure the cappuccino frother always works properly, rinse
and clean it regularly (see Chapter 5 'Maintenance – Rinsing the
cappuccino frother').
/ , coffee preparation starts.
COFFEE
appears briefly on the dis-
ENJOY
is displayed.
COFFEE READY
appears on the display.