Jura J90 Instructions For Use Manual page 37

T Remove and empty the water tank.
T Completely dissolve 3 JURA descaling tablets in a receptacle
holding 500 ml of water. This may take several minutes.
T Pour the solution into the empty water tank and insert it into
the machine.
'Please press the Rotary Switch.'
T Carefully pull the cappuccino frother down and off.
T Place a receptacle under the connector of the cappuccino
frother.
k T Press the Rotary Switch.
'Machine is being
the connector of the cappuccino frother.
The operation stops automatically,
T Empty the receptacle under the connector of the cappuc-
cino frother.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
'Fill water tank'
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
'Please press the Rotary Switch.'
T Refit the cappuccino frother.
T Place one receptacle under the coffee spout and another
under the cappuccino frother.
k T Press the Rotary Switch.
'Machine is being
cino frother and the coffee spout.
'Machine is heating.',
the coffee spout.
The operation stops automatically,
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Descaling is now complete. Your JURA is once more ready for
use.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
descaled.', water flows repeatedly out of
'Empty drip
descaled.', water flows out of the cappuc-
'Machine is rinsing.', water flows out of
'Empty drip
5 Maintenance
tray'.
tray'.
37