Cleaning The Machine - Jura J90 Instructions For Use Manual

5 Maintenance

Cleaning the machine

CAUTION
34
E If you do not want to start changing the filter just yet, press
the ' ' button. The prompt
T Press the
'Next'
'Change filter'
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Blue filter
cartridge and filter extension.
T Fit the filter extension on top of a new filter cartridge.
T Insert the filter cartridge into the water tank, exerting slight
pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 500 ml) under the cappuccino
frother.
T Turn the setting wheel of the cappuccino frother to the
Steam n position.
T Press the
'Next'
'Filter is being
frother.
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switch k to continue rinsing of
the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500 ml. The JURA heats up and is once more ready for use.
After 200 preparations or 80 switch-on rinses, the JURA will prompt
you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
'Change filter'
button.
button.
rinsed.', water flows out of the cappuccino
remains active.