Dismantling And Rinsing The Cappuccino Frother; Changing The Filter - Jura J90 Instructions For Use Manual

Dismantling and rinsing
the cappuccino frother

Changing the filter

T Empty the other receptacle and place it under the cappuc-
cino frother again.
T Press the
'Next'
'Milk system is being
the pipe are rinsed with fresh water.
'Please select product:'
To make sure the cappuccino frother works properly, and in the
interests of hygiene, it must be dismantled and rinsed daily if you
have been preparing milk.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Carefully pull the cappuccino frother down and off.
T Dismantle the cappuccino frother into its individual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 250 ml cold water and one capful of JURA
milk system cleaner. Then rinse the parts thoroughly.
T Reassemble the cappuccino frother.
E Ensure that all individual parts are correctly and firmly con-
nected to ensure correct operation of the cappuccino frother.
T Firmly attach the frother to the connector.
E After 50 litres of water have flowed through, the filter will
cease to work. Your JURA will automatically prompt you to
change the filter.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
E If the CLARIS Blue filter cartridge is not activated in program-
ming mode, you will not be prompted to change the filter.
Precondition: 'Change filter'
O T Press the P button.
'Maintenance status (1/6)'
T Press the
'Change the filter'
'Change the filter'
button.
cleaned.', the cappuccino frother and
appears on the display.
is displayed.
button.
5 Maintenance
33