Warm Milk And Milk Foam - Jura S8 Instruction Manual

2 Preparation
Warm milk and milk
foam
18
T Set the selector switch for the professional fine foam frother
to the Milk Foam position (see image).
T Touch 'Latte macchiato'.
'Latte macchiato'
foam flows into the glass.
E There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form.
Coffee preparation starts. The preset amount of water for
espresso flows into the glass. Preparation stops automati-
cally. Your S8 is once more ready for use.
E 15 minutes after preparation, the fine foam frother is
automatically rinsed (see Chapter 5 'Maintenance –
Automatic milk system rinsing'). Therefore always place a
receptacle under the fine foam frother after preparing milk.
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk (see
Chapter 5 'Maintenance – Cleaning the milk system').
Example: Proceed as follows to prepare hot milk.
Precondition: The start screen is displayed. Milk is connected to the
milk system.
T Place a cup under the fine foam frother.
T Set the selector switch for the professional fine foam frother
to the Milk position (see image).
E If you wish to prepare milk foam, set the selector switch to the
Milk Foam position (selector switch in vertical position).
appears and the preset amount of milk