Inserting And Activating The Filter - Jura J90 Instructions For Use Manual

1 Preparing and using for the first time
Inserting and activating
the filter
12
Your JURA no longer has to be descaled if you are using the CLARIS
Blue filter cartridge. If the water hardness is 10 °dH or more, we rec-
ommend using the filter cartridge.
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 'Preparing and using for the first
time – Determining the water hardness').
E Perform the 'inserting the filter' operation without any inter-
ruptions. This will ensure that your JURA always produces its
best.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/6)'
g T Turn the Rotary Switch until the programme item
nance settings (3/6)'
T Press the
'Filter'
'Filter'
T Press the
'Active'
T Press the
'Save'
'Saved' appears briefly on the display.
'Insert filter'.
T Remove the filter cartridge extension from the Welcome
Pack.
T Fit the filter extension on top of a CLARIS Blue filter cartridge.
T Remove and empty the water tank.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
is displayed.
is displayed.
button.
button.
button.
'Mainte-