Permanent Settings In Programming Mode - Jura J90 Instructions For Use Manual

4 Permanent settings in programming mode

Programme item
'Maintenance
status (1/6)'
'Product settings
(2/6)'
'Maintenance
settings (3/6)'
'Machine settings 1
(4/6)'
'Machine settings 2
(5/6)'
'Information (6/6)'
Press the P button to enter programming mode. You can navigate
through the programme items and permanently save the required
settings simply by turning the Rotary Switch and using the multi-
function buttons. The following settings can be made:
Sub-item
'Clean',
'Descale' (only if filter is
not activated),
'Change the filter' (only
if filter is activated),
'Switch-on rinse',
'Clean the milk system'
'Expert mode'
'Filter',
'Water hardness' (only
if filter is not activated),
'Switch-on rinse',
'Rinse the milk system'
'Save energy',
'Switch off after',
'Units',
'Factory setting'
'Choose language',
'Display',
'Colour scheme'
'Product counter',
'Maintenance counter',
'Version'
4 Permanent settings in programming mode
Explanation
T Start the required maintenance programme
here.
T Select your settings for speciality coffees and
hot water.
T Indicate whether you are operating your JURA
with or without a CLARIS Blue filter cartridge.
T Adjust the water hardness.
T Change the settings for the switch-on rinse and
milk system rinse.
T Select an energy-saving mode.
T Set the time after which the JURA should switch
off automatically.
T Select the unit for the amount of water.
T Reset the permanently set values of all
products to the factory settings.
T Select your language and the background
colour for the display.
T Keep track of all speciality coffees prepared and
view the number of maintenance programmes
performed.
23