Energy-Saving Mode - Jura J90 Instructions For Use Manual

4 Permanent settings in programming mode

Energy-saving mode

26
Example: Proceed as follows to make the machine prompt you to
rinse the milk system immediately after preparing a speciality cof-
fee with milk.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/6)'
g T Turn the Rotary Switch until the programme item
nance settings (3/6)'
T Press the
'Rinse the milk system'
'Rinse the milk system'
T Press the
'Immediate'
T Press the
'Save'
'Saved' appears briefly on the display.
'Maintenance settings (3/6)'
O T Press the P button to exit programming mode.
'Please select product:'
In the programme item
can permanently set an energy-saving mode:
U
'Inactive'
U
All speciality coffees, speciality coffees with milk and hot
water can be prepared without having to wait.
U
The machine must heat up before milk preparation.
U
'Active' (Energy saving of up to 40%)
U
Soon after the last preparation, the JURA stops heating up.
As soon as the energy-saving temperature is reached, this is
indicated in the display by the message
may take several minutes.
U
The machine must heat up before coffee, hot water or milk
preparation.
Example: Proceed as follows to change the energy-saving mode
from 'Inactive' to 'Active'.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/6)'
g T Turn the Rotary Switch until the programme item
settings 1 (4/6)'
is displayed.
is displayed.
button.
button.
button.
'Machine settings 1 (4/6)' /
is displayed.
is displayed.
'Mainte-
'Save energy' you
'Energy Save' – this
'Machine