3 Daily operation
Switching on the
machine
Daily maintenance
When the JURA is switched on, it automatically prompts you to per-
form the switch-on rinse. Start the switch-on rinse by pressing the
Rotary Switch k. In programming mode you can change this setting
so that the machine starts the switch-on rinse automatically (see
Chapter 4 'Permanent settings in programming mode – Mainte-
nance settings').
Precondition: Your JURA is switched on at the power switch.
T Place a receptacle under the coffee spout.
Q T Press the On/Off button to switch the JURA on.
'Welcome to JURA'
heats up.
'Please press the Rotary Switch.'
k T Press the Rotary Switch.
The machine rinses. The operation stops automatically.
'Please select product:'
To ensure that you get many years of reliable service out of your
JURA and to guarantee the optimum coffee quality, the machine
requires daily maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
E Always empty the coffee grounds container when the machine
is switched on. This is the only way of resetting the coffee
grounds counter.
T Refit the coffee grounds container and the drip tray.
T Rinse the water tank with clean water.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Dismantle and rinse the cappuccino frother (see Chapter 5
'Maintenance – Dismantling and rinsing the cappuccino
frother').
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
appears on the display. The machine
appears on the display.
3 Daily operation
21