Kramer VS-88HN User Manual page 35

Command - DISPLAY?
Command Name
Set: -
Get DISPLAY?
Description
Set: -
Get: Get output HPD status
Response
␠out_id,status ␍␊
~ nn@DISPLAY
Parameters
out_id - output number
status - HPD status according to signal validation – 0: Signal or sink is not valid, 1: Signal or sink is
valid, 2: Sink and EDID is valid
Response Triggers
After execution, response is sent to the com port from which the Get was received
Response is sent after every change in output HPD status ON to OFF
Response is sent after every change in output HPD status OFF to ON and ALL parameters (new EDID,
etc.) are stable and valid
Command –
FACTORY
Command Name
Set: FACTORY
Get: -
Description
Set: Reset device to factory defaults configuration
Get : -
Response
~nn@BUILD-DATE␠date␠time␍␊
Notes
This command deletes all user data from the device. The deletion can take some time.
32
Command Type - System
Permission
-
End User
Syntax
-
#DISPLAY?␠out_id␍
Command Type – System-mandatory
Permission
End User
-
Syntax
#FACTORY␍
-
Transparency
-
Public
Transparency
-
-
VS-88HN - Protocol 3000