Kramer VS-88HN User Manual page 36

Command - GEDID
Command Name
Set: GEDID
Get: GEDID?
Description
Set: Set EDID data from device
Get: Get EDID support on certain input/output
Response
Set:
Multi-line response:
~nn@GEDID␠stage,stage_id,size␍␊
EDID_data␍␊
~nn@GEDID␠stage,stage_id␠OK␍␊
Get:
~nn@GEDID␠stage,stage_id,size␍␊
Parameters
stage - input/output – 0: input, 1:output, 2: default EDID
stage_id - number of chosen stage (1.. max number of inputs/outputs)
size - EDID data size. For Set, size of data to be sent from device, for Get, 0 means no EDID support
Response Triggers
Response is sent to the com port from which the Set (before execution) / Get command was received
Notes
For Get, size=0 means EDID is not supported
For old devices that do not support this command, ~nn@ ERR 002␍␊ is received
Command - HELP
Command Name
Set: -
HELP
Get:
Description
Set: -
Get command list or help for specific
Get:
command
Response
1. Multi-line: ~nn@Device available protocol 3000 commands:␍␊command,␠command...␍␊
To get help for command use: HELP (COMMAND_NAME)␍␊
2. Multi-line: ~nn@HELP␠command:␍␊description␍␊USAGE:usage ␍␊
VS-88HN - Protocol 3000
Command Type - System
Permission
Administrator
End User
Syntax
#GEDID␠stage, stage_id ␍
#GEDID?␠stage, stage_id ␍
Command Type - System-mandatory
Permission
-
End User
Syntax
-
2 options:
1. #HELP␍
2. #HELP␠command_name␍
Transparency
Public
Public
Transparency
-
Public
33