Gps Operation; Displaying Position Information; Gps Information Compass Display; Gps Information Numerical Display - Standard Horizon HX890E Owner's Manual

9. GPS OPERATION

The HX890 has an internal GPS antenna to receive and display the position
information. Your position information as well as other station received positions
can be stored in memory and utilized later for navigation.
The GPS unit may be turned off, or set to power save mode to increase
the battery life, via the SETUP menu. Refer to section "16. GPS SETUP".
9.1

DISPLAYING POSITION INFORMATION

9.1.1 GPS Information Compass Display

Press key
1. Press the [ENTER] soft key to display the compass display.
2. Press the [CLR] key to return to radio operation.
Note: A soft key may be assigned to immediately switch
the screen between the basic display and the compass
display by pressing the [COMP] soft key.

9.1.2 GPS Information Numerical Display

Press key
1. Press the [ENTER] soft key to reveal the numerical display.
2. Press the [CLR] key to return to radio operation.
9.2

CHECKING GPS STATUS

Press key
1. Press the [ENTER] soft key to display the GPS status
currently being received.
2. Press the [CLR] key to return to radio operation.

( / /

( / /

( / /
NOTE
SELECT

/ key) (
SELECT

/ key) (
SELECT

/ key) (
COMPASS

key) ( /
RX
COMP
C-UP
TIME
GPS INFO

key) ( /
RX
10
123 ° 56.8900
COG
T
300°
TIME
GPS STATUS

key) ( /
RX
10
STATUS
SEARCH
TIME
key)
USA HI
65
10
COG
T
300 °
SOG
kph
36.0
LOC 09:56
AM
key)
USA HI
65
LAT/LON
23 ° 56.8900
N
W
SOG ALT
kph ft
36.0 003
LOC 09:56
AM
key)
USA 65 HI
LAT/LON
23 ° 56.8900
N
123 ° 56.8900
W
LOC 09:56:56
AM
33