Changing The Turn Signal Sound - Mitsubishi LANCER 2012 Manual

3. Press and hold the multi-information meter switch (for
about 2 seconds or more) to display "ALARM" (rest time
setting).
Type 1
4. Lightly press the multi-information meter switch to select
the amount of time until the display appears.
5. Press and hold the multi-information meter switch (for
about 2 seconds or more) to change the setting to the
selected time.
NOTE
If the battery is disconnected, the memory of the unit set-
ting is erased and is automatically set to the "OFF".
The drive time is reset when the ignition switch is in the
"OFF" position.
Type 2
I n f o r ma t i o n P r o v i d e d b y :

Changing the turn signal sound

It is possible to change the turn signal sound.
1. Press and hold the multi-information meter switch for
about 2 seconds or more to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings (With ignition
switch in the "ON" position)" on page 3-201.
2. Lightly press the multi-information meter switch to select
. (changing the turn signal sound)
Type 1
Type 2
Features and controls
N00563500038
3
3-211