System Check Screen; Drive Mode Indicator Display Screen; Acd Control Mode Display Screen - Mitsubishi LANCER 2012 Manual

Features and controls

System check screen

When the ignition switch is turned to the "ON" position, the
system check screen is displayed for about 4 seconds. If there
is no fault, information screen (when the ignition switch is
"ON") is displayed.
If there is a fault, the screen changes to warning display. Refer
to "Warning display list (when the ignition switch is "ON"
position)" on page 3-219.
Type 1
3
NOTE
The system check screen display varies depending on
your equipment.
3-188
Type 2
Service reminder
When the time for periodic inspection arrives, the warning dis-
play is displayed for a few seconds after the screen that is ini-
tially displayed when the ignition switch is turned "ON". Refer
to "Service reminder" on page 3-198.
Type 1
Type 2

Drive mode indicator display screen

Shows the 4WD drive status.
Refer to "Drive mode-selector" on page 3-136.

ACD control mode display screen

The operation status of the ACD control mode is displayed.
Refer to "ACD control mode" on page 3-133.
I n f o r ma t i o n P r o v i d e d b y :
(if so equipped)
N00555900046
(if so equipped)
N00545900027