Multi-Information Display - Mitsubishi LANCER 2012 Manual

The multi-information display displays warnings, the odometer, trip odometer, service reminder, engine coolant temperature, fuel
remaining, outside temperature, Twin Clutch SST control mode, ACD control mode, gearshift lever position, selector lever posi-
tion, all-wheel drive operation status, average and momentary fuel consumption, driving range, average speed, instrument bright-
ness, etc.
It is also possible to change elements such as the language and units used on the multi-information display.
With ignition switch is
"OFF" position
Type 1 Type 2
1-
Warning display screen (With ignition switch in the
"OFF" position) → P.3-183
2- Information screen (With ignition switch in the "OFF" posi-
tion) → P.3-183
Interrupt display screen (With ignition switch in the "OFF"
position) → P.3-185
3- Door ajar warning display screen (With ignition switch in the
"OFF" position) → P.3-187

Multi-information display

Type 1 Type 2
4-
position) → P.3-189
5- Active stability control (ASC) OFF display screen (if so
equipped) → P.3-189
6- Information screen (With ignition switch in the "ON" posi-
tion) → P.3-189
Interrupt display screen (With ignition switch in the "ON"
position) → P.3-194
7- Outside temperature display screen → P.3-196
8- Fuel remaining display screen → P. 3-196
I n f o r ma t i o n P r o v i d e d b y :
With ignition switch is "ON"
position (Manual transaxle)
Type 1
Warning display screen (With ignition switch in the "ON"
Features and controls
N00555000236
Type 2
3
3-181