Gearshift Lever Positions (Main Shift Gate) - Mitsubishi LANCER 2012 Manual

Features and controls
4. If the engine can be restarted, the vehicle can be driven
normally.
If the warning display remains on or comes on frequently, have
the vehicle checked by an authorized Mitsubishi Motors dealer
or a repair facility of your choice.
When warning display is showing
A safety device in the Twin Clutch SST has been activated due
to a possible malfunction in the Twin Clutch SST or in the
engine electronic control module.
If this occurs, perform the following procedure.
3
1. Park your vehicle in a safe place and stop the engine.
2. Restart the engine.
If the warning display goes out, there is no abnormal condi-
tion.
However, if the warning display remains on or comes on fre-
quently, have the vehicle checked by an authorized Mitsubishi
Motors dealer or a repair facility of your choice as soon as pos-
sible.
CAUTION
!
If the warning display is shown, such as when the
vehicle does not accelerate while traveling even if
the accelerator pedal is depressed, the vehicle may
not be able to be driven normally.
For safety, pay attention to your surroundings when
driving the vehicle.
3-118

Gearshift lever positions (Main shift gate)

"P" PARK
This position locks the transmission to prevent the vehicle
from moving. The engine can be started from the "PARK"
position.
"R" REVERSE
N00543200039
Move the lever to this position only after the vehicle has come
to a complete stop.
CAUTION
!
Never shift into the "P" (PARK) or "R"
(REVERSE) position while the vehicle is in motion.
If the lever is shifted into the "P" (PARK) or "R"
(REVERSE) position while the vehicle is in motion,
the transmission may be damaged.
I n f o r ma t i o n P r o v i d e d b y :
N00540100011