Driving Uphill; Driving Downhill; Selector Lever Operation; Continuously Variable Transmission (Cvt) (If So Equipped) - Mitsubishi LANCER 2012 Manual

Features and controls
Continuously variable transmission (CVT)
The CVT is capable of changing the engine speed to vehicle
speed ratio automatically and steplessly to suit driving condi-
tions in all phases of vehicle operation. It therefore realizes
smooth, shock-free operation and excellent fuel efficiency.

DRIVING UPHILL

The transmission may not shift to a higher ratio if the computer
determines your current speed would be affected.
For smoother operation, the transmission may not shift if you
release the throttle while climbing a steep hill. This is normal
3
because the computer controls the shifting. After reaching the
top of the hill, your normal shift function will resume.

DRIVING DOWNHILL

When traveling down steep grades and using the brakes, the
computer may automatically shift to a lower ratio. This helps
engine braking efforts, reducing your need to use the brakes.
CAUTION
!
Automatic downshifts may not take place if the con-
tinuously variable transmission (CVT) fluid is still
cool immediately after you start driving. To cause a
downshift, depress the brake pedal or shift down
manually.
Always drive safely in accordance with road condi-
tions.
3-98
(if so equipped)

Selector lever operation

As an additional safety precaution, models equipped with a
N00513200186
continuously variable transmission have a shift-lock device
that holds the selector lever in the "P" (PARK) position. To
move the selector lever from the "P" (PARK) position to
another position, follow the steps below.
1. Press and hold the brake pedal down.
2. Move the selector lever to the desired position.
NOTE
The selector lever cannot be moved from "P" (PARK) to
another position if the ignition switch is at the "LOCK" or
"ACC" position, or the key has been removed, or if the
brake pedal is not pressed and held down.
I n f o r ma t i o n P r o v i d e d b y :
N00513800384