Selector Lever Positions - Mitsubishi LANCER 2012 Manual

Features and controls
CAUTION
!
If a malfunction occurs in the CVT while driving,
the warning display or the
will appear on the information screen in the multi-
information display.
In this case, immediately park your vehicle in a safe
place and follow these procedures:
[When warning display is showing]
The continuously variable transmission (CVT) fluid
is overheating. The engine control may activate to
3 lower the CVT fluid temperature, causing the
engine revolutions and vehicle speed to decrease. In
this case, take one of the following procedures:
• Slow down your vehicle.
• Stop your vehicle in a safe place, put the selector
lever in the "P" (PARK) position, and open the
engine hood with the engine running to allow the
engine to cool down.
After a while, confirm that the
no longer showing. It is safe to continue driving if
the display is no longer showing. If the warning dis-
play remains or flashes frequently, have your vehicle
inspected by an authorized Mitsubishi Motors
dealer or a repair facility of your choice.
3-104
warning display

Selector lever positions

"P" PARK
This position locks the transmission to prevent the vehicle
from moving. The engine can be started from the "PARK"
position.
"R" REVERSE
Move the lever to this position only after the vehicle has come
to a complete stop.
warning display is
I n f o r ma t i o n P r o v i d e d b y :
CAUTION
!
[When warning display is showing]
It may be that there is something unusual happening
in the CVT, causing a safety device to activate. Have
your vehicle inspected by an authorized Mitsubishi
Motors dealer or a repair facility of your choice as
soon as possible.
CAUTION
!
Never shift into the "P" (PARK) or "R"
(REVERSE) position while the vehicle is in motion.
If the lever is shifted into the "P" (PARK) or "R"
(REVERSE) position while the vehicle is in motion,
the transmission may be damaged.
N00514200356