Acd Control Mode; Acd Control Mode Switch - Mitsubishi LANCER 2012 Manual

ACD control mode

Select the control mode from the following three types to suit
the driving conditions.
ACD control
mode
Normally, use this control mode. Use this
TARMAC
mode for paved roads.
Use this control mode when driving on some-
GRAVEL what slippery road surfaces, such as wet road
surfaces and gravel roads.
Use this control mode when driving on slip-
SNOW pery road surfaces, such as snow-covered
roads.
N00545400048
Operation
I n f o r ma t i o n P r o v i d e d b y :

ACD control mode switch

When the ignition switch is set to the "ON" position, operate
the AWC switch to change the control mode.
Each time the switch is pushed, the control mode changes in
the order "TARMAC" → "GRAVEL" → "SNOW" → "TAR-
MAC".
NOTE
The control mode can be changed while the vehicle is
moving.
The selected control mode is stored in memory even if the
engine is stopped.
However, if a battery terminal is disconnected, the control
mode stored in memory will be erased and the control
mode will be set to the "TARMAC" mode.
Features and controls
3
3-133