Traction Control Function; Skid Control Function - Mitsubishi LANCER 2012 Manual

Features and controls
NOTE
An operation noise may be emitted from the engine com-
partment in the following situations. The sound is associ-
ated with checking the operations of the ASC. At this
time, you may feel a shock from the brake pedal if you
depress it. These do not indicate a malfunction.
• When the ignition switch is set to the "ON" position.
• When the vehicle is driven for a while after the engine is
turned on.
When the ASC is activated, you may feel a vibration in
the vehicle body or hear a whining sound from the engine
compartment.
This indicates that the system is operating normally. It
3
does not indicate a malfunction.
When the anti-lock braking system warning light is illu-
minated, the ASC is not active.

Traction control function

On slippery surfaces, the traction control function prevents the
drive wheels from spinning excessive, thus helping the vehicle
to start moving from a stopped condition. It also provides suffi-
cient driving force and steering performance as the vehicle
turns while pressing the acceleration pedal.
CAUTION
!
When driving a vehicle on a snowy or icy road, be
sure to install snow tires and drive the vehicle at
moderate speeds.
3-152

Skid control function

The skid control function is designed to help the driver main-
tain control of the vehicle on slippery roads or during rapid
steering maneuvers. It works by controlling the engine output
and the brake on each wheel.
NOTE
The skid control function operates at speeds of about 9
mph (15 km/h) or higher.
N00559200034
I n f o r ma t i o n P r o v i d e d b y :
N00559300035