Mitsubishi LANCER 2012 Manual page 290

NOTE
Warning display screens with a " " or " " mark dis-
played in the upper right of the screen can be switched. If
you want to switch the display, press the multi-informa-
tion meter switch as follows.
" ": Press lightly.
" ": Press for about 2 seconds or more.
Redisplay of a warning display screen
When the warning is displayed, if you lightly press the
multi-information meter switch a few times, the warning dis-
play screen you switched from is redisplayed.
Other interrupt displays
The operation status of each system is displayed on the infor-
mation screen.
For further details, refer to the appropriate page in the warning
display list.
Refer to "Other interrupt displays (With ignition switch in the
"ON" position)" on page 3-226.
Selector lever position display screen {continu-
ously variable transmission (CVT)}
Shows the position of the selector lever.
Refer to "Selector lever operation" on page 3-98.
Gearshift lever position display screen (Twin
Clutch SST)
Shows the position of the gearshift lever.
Refer to "Gearshift lever operation" on page 3-112.
I n f o r ma t i o n P r o v i d e d b y :
Features and controls
3
N00556400048
N00545800055
3-195