Light Auto-Cutout Function - Mitsubishi LANCER 2012 Manual

NOTE
The sensitivity of the automatic on/off control can be
adjusted.
For further information, please contact your authorized
Mitsubishi Motors dealer or a repair facility of your
choice.
Do not cover the sensor (A) for the automatic on/off con-
trol by affixing a sticker or label to the windshield.
If the lights do not turn on or off with the switch in the
"AUTO" position, manually operate the switch and we
recommend you to have your vehicle checked.
Light auto-cutout function (headlights and other
lights)
If the ignition key is turned to "LOCK" or "ACC" posi-
tion or removed from the ignition switch and the driver's
door is opened with the combination headlights and dim-
mer switch in the "
matically turn off.
[When using a key to start the engine]
• If the driver's door is opened after the key is removed
from the ignition switch, a high-pitched constant tone
will sound to remind you to turn off the lights.
• If the driver's door is opened with the key in the ignition
switch, a low-pitched tone will sound to remind you to
remove the key.
[When using the F.A.S.T.-key to start the engine]
• If the ignition switch is turned to the "LOCK" position
and the driver's door is opened, a high-pitched constant
buzzer will sound to remind you to turn off the lights.
• If the ignition switch is turned to any position other than
"LOCK" and the driver's door is opened, a low-pitched
constant buzzer will sound to remind you to return the
ignition switch.
If the ignition switch is turned to "LOCK" or "ACC" posi-
tion with the driver's door closed and the combination
headlights and dimmer switch in the "
tion, the lights will stay on for about 3 minutes and then
turn off automatically.
I n f o r ma t i o n P r o v i d e d b y :
Features and controls
N00532600509
" or " " position, the lights auto-
" or " " posi-
3
3-237