Types Of Connectable Devices And Supported File Specifications; Device Types - Mitsubishi LANCER 2012 Manual

Table of Contents

Advertisement

5. To remove the Dock connector, turn the ignition switch to
the "LOCK" position first and perform the installation
steps in reverse.
Types of connectable devices and supported file
specifications

Device types

Devices of the following types can be connected.
Model name
USB memory device
iPod touch*
iPod classic*
iPod (fifth generation)*
iPod nano (fifth generation)*
iPod nano (second generation)* F/W Ver.1.1.2 or later
Models other than USB mem-
ory devices and iPods
*: "iPod touch," "iPod classic," "iPod" and "iPod nano" are
registered trademarks of Apple Inc. in the Untied States and
other countries.
N00567000028
N00567100032
Condition
Storage capacity of 256 Mbytes
or more
F/W Ver.1.1.1 or later
F/W Ver.1.0 or later
F/W Ver.1.2.2 or later
F/W Ver.1.2 or later
Digital audio player supporting
mass storage class
I n f o r ma t i o n P r o v i d e d b y :
NOTE
Depending on the type of the USB memory device or
other device connected, the connected device may not
function properly or the available functions may be lim-
ited.
Use the iPod whose firmware has been updated to the lat-
est version.
You can charge your iPod by connecting it to the USB
input terminal when the ignition switch is in the "ACC" or
"ON" position.
Do not keep your USB memory device or iPod in your
vehicle.
It is recommended that you back up the files in case of
data damage.
Do not connect to the USB input terminal any device
(hard disk, card reader, memory reader, etc.) other than
the connectable devices specified in the previous section.
The device and/or data may be damaged. If any of these
devices was connected by mistake, remove it after turning
the ignition switch to the "LOCK" position.
Features and controls
3
3-287

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents