Qos Profile - 4IPNET HSG260 User Manual

6.3.3 QoS Profile

Up to 5 QoS profiles can be configured for certain applications or users that need stable bandwidth or traffic priority.
Bandwidth Control can only be Enabled when Bandwidth limits on WAN has been Enabled.

Traffic Class: Traffic Class can be chosen for users on IPv4 or IPv6. Default DSCP (Differentiated Services
Code Point) can be added and edited to determine traffic class. Default DSCP includes: Network Control
0x30, Telephony 0x2E, Signaling 0x28, Multi-media Conferencing 0x26, Real-Time Interactive 0x20,
Multi-media Streaming 0x1A, Broadcast Video 0x18, Low-latency Data 0x12, OAM 0x10, High-Throughput
Data 0x0A, Standard 0x00, Low Priority Data 0x08.

Bandwidth Control: Enable or Disable the capability to determine the following parameters.

Group Total Downlink: Defines the maximum bandwidth allowed to be shared by clients.

Individual Maximum Downlink: Defines the maximum downlink bandwidth allowed for an individual client.
The Individual Maximum Downlink cannot exceed the value of Group Total Downlink.

Individual Request Downlink: Defines the guaranteed minimum downlink bandwidth allowed for an
individual client. The Individual Request Downlink cannot exceed the value of Group Total Downlink and
Individual Maximum Downlink.

Group Total Uplink: Defines the maximum uplink bandwidth allowed to be shared by clients.

Individual Maximum Uplink: Defines the maximum uplink bandwidth allowed for an individual client. The
Individual Maximum Uplink cannot exceed the value of Group Total Uplink.

Individual Request Uplink: Defines the guaranteed minimum bandwidth allowed for an individual client. The
Individual Request Uplink cannot exceed the value of Group Total Uplink and Individual Maximum Uplink.
HSG Wireless Hotspot Gateway ENGLISH
68
User's Manual