Front Panel - 4IPNET HSG260 User Manual

1 Quick button
2 WES button
3 Power LED
4 Status LED
5 Wireless LED
6 WAN LED
7 LAN1 - 4 LED
8 USB LED
9 WES LED

Front Panel

Press this button to quick-print an account generated from billing plan 1.
Press and hold over 5 seconds to initiate Master Mode for the WES process.
Press and release to initiate Slave Mode for the WES process.
On indicates power on.
On indicates the system ready.
On indicates wireless network interface is ready for service.
On indicates that WAN uplink connected.
Indicates the connection status of each LAN.
Indicates the status of USB connection. USB port reserved for future use.
For indicating WDS connection status.
Master
LED (Green) OFF and
WES Start
then BLINKING SLOWLY
BLINKING NORMALLY
WES Negotiate
(Green)
WES Timeout LED (Green) ON
WES Success LED (Red) ON
WES Fail LED (Green) ON
5
HSG Wireless Hotspot Gateway ENGLISH
Slave
LED (Red) OFF and then
BLINKING SLOWLY
BLINKING NORMALLY
(Red)
LED (Red) ON
LED (Green) ON
LED (Red) ON
User's Manual