4IPNET HSG260 User Manual page 37

From the overview table, each rule is designated with the following field;

No.: The numbering will decide the priority of which the system will carry out the available firewall rules in
the tables.

Active: Checking this field will mark the rule as active which means this rule will be enforced.

Action: Block denotes a block rule; PASS denotes a pass rule.

Rule Name: This is the denominated name of the rule.

EtherType: It denotes the type of traffic subjected to this rule.

Remark: It shows the additional reference information of this rule.

Operation: 4 actions are available; Edit denotes to edit the rule details, Move to denotes to move the rule
to a specified rule number, Insert Before denotes to insert a rule before the current rule, and Delete
denotes to delete the rule.
>>To edit a specific rule,
Edit in Operation column of firewall rules will lead to the following page for detailed configuration. On this page,
the rule can be edited from an existing rule for revision.
 Rule Number: The numbering of this specific rule will decide its priority among available firewall rules on
the list.
 Rule name: The rule name can be denominated here.
 Action for Matched Packets: The rule can be chosen to be Block or Pass packets that match the rule
criteria.

Rule Remark: The additional reference note of this rule can be specified here.
 EtherType: The drop-down list will provide the available types of traffics subject to this rule.

Interface: For specifying the traffic direction (To or From VAP2) subjected to this rule.
 IPv4 Service (when EtherType is IPv4): Select the available upper layer protocols/services from the
HSG Wireless Hotspot Gateway ENGLISH
32
User's Manual