4IPNET HSG260 User Manual page 187

User's Manual
HSG Wireless Hotspot Gateway ENGLISH
IP address: 192.168.1.10
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
Remember to set the TCP/IP settings of the computer you use with a static IP address that is under the same
subnet as SDS200W. For example: 192.168.1.20.
The settings of SDS200W are separated into seven categories, which are
1. System – to setup the system name and device control.
2. Uplink – to determine wired / wireless relevant parameters. Any change on this page will take effect after
rebooting the system.
3. Console – to change console related settings for POS printers.
4. Utility – to upgrade the firmware version or backup/ restore SDS200W's configuration settings.
5. Password – to change administrator's password.
6. Reboot – to reboot (restart) the system.
7. Status – to overview device, system, uplink, and radio status if available.
Setting Up SDS200W with the POS Printer
Serial Settings
To make a POS printer properly functions with SDS200W, set up serial settings in advance in Console on
SDS200W's WMI. The default values are for PRT-100 devices. Change the values if you use another POS printer.
182