4IPNET HSG260 User Manual page 38

drop-down list.

DSAP/SSAP (when EtherType is IEEE 802.3): The value can be further specified for the fields in 802.2
LLC frame header.
 SNAP Type (when EtherType is IEEE802.3): The field can be used to indicate the type of encapsulated
traffics.
 Opcode (when EtherType is ARP): This list can be used to specify the ARP Opcode in ARP header.
 Source: MAC Address/Mask indicates the source MAC; IP Address/Mask indicates the source IP address
(when EtherType is IPv4); ARP IP/MAC & MASK indicate the ARP payload fields (when EtherType is
ARP).
 Destination: MAC Address/Mask indicates the destination MAC; IP Address/Mask indicates the
destination IP address (when EtherType is IPv4); ARP IP/MAC & MASK indicate the ARP payload fields
(when EtherType is ARP).
When the configurations are made; please click Apply to let the firewall rule take effort.
>>To insert a specific rule,
Inserting Before in Operation column of firewall list will lead to the following page for detailed configuration
with a rule ID for the rule currently being inserted.
>>To move a specific rule,
Move to in Operation column of firewall rules will lead to the following page for reordering confirmation. Click
OK to save the changes made.
HSG Wireless Hotspot Gateway ENGLISH
33
User's Manual