4.3
Zone Wireless Security
To configure Zone Wireless Security, go to: System >> Service Zones, click Configure for the respective Service
Zones.
After the above configurations are finished, setting up the wireless security is very important to protect your wireless
network. Below shows an example of VAP Settings for VAP1 and VAP2.
Security:
For each zone, administrators can set up the wireless security profile, it includes WEP and WPA-PSK.
WEP:
o
802.11 Authentication: Select from Open System or Shared Key.
o
WEP Key Length: Select from 64-bit, 128-bit, 152-bit key length.
o
WEP Key Format: Select from ASCII or Hex format for the WEP key.
o
WEP Key Index: Select a key index from 1~4. The WEP key index is a number that specifies which
WEP key will be used for the encryption of wireless frames during data transmission.
HSG Wireless Hotspot Gateway ENGLISH
28
User's Manual