4IPNET HSG260 User Manual page 183

Keypad Panel Overview
Useful Shortcut Keys
Combination
'Number' + ENTER
'Number 1' + 'asterisk
(*)' +
'Number 2' + ENTER
FUNC + '1' + ENTER
FUNC + ENTER
FUNC + '0' + ENTER
'4-digit' + ENTER
'asterisk (*)' + ENTER
Function
To create and print out an on-demand account of an enabled billing plan of the
uplink Hotspot gateway mainly for the user who purchased an account.
Print a ticket of billing 'Number 1' with 'Number 2' units. For example, '8' +
asterisk(*) + '3' + ENTER is equal to create an on-demand account of billing
plan 8 with 3 units and have the POS printer print out the corresponding ticket.
That is, the quota that billing plan 8 grants is multiplied by 3.
To print out the information of SDS200W, including (1) its IP address (2) the
firmware version and the build number (3) the current listening port (4) uplink
connection status (5) the IP address of the uplink 4ipnet gateway (HSG/WHG).
To clear what is pressed. This is used when the operator pressed a wrong
button or combination. The system will also clear it automatically after five
seconds.
To activate Safe Mode – disabling the FUNC + '1' + ENTER shortcut key in
order to protect SDS200W's information leakage.
To unlock Safe Mode. This 4-digit password can be changed on the WMI at
"System >> Safe Mode (Password)." The default value is '0000.'
To lock the keypad, excluding the TAS and the Reset button. In Lock Mode,
the Status indicator will enter into special flashing. Press asterisk (*) + ENTER
again to disable the function, and the LED indicator Status will go back to
178
HSG Wireless Hotspot Gateway ENGLISH
User's Manual