Wan Bandwidth Control - 4IPNET HSG260 User Manual

3.4

WAN Bandwidth Control

To configure WAN Bandwidth Control, go to: System >> WAN Traffic.
The feature gives administrators control over the entire system's traffic on the WAN interface. These parameters
set here should not exceed the real bandwidth provided by your ISP. For example, if your xDSL is 8Mbs/640kbs,
you may input values equal to or less than the speed here.
Available Bandwidth on WAN Interface:

Uplink: It specifies the maximum uplink bandwidth that can be shared by clients of the system.

Downlink: It specifies the maximum downlink bandwidth that can be shared by clients of the system.
HSG Wireless Hotspot Gateway ENGLISH
16
User's Manual