Console Interface - 4IPNET HSG260 User Manual

10.12 Console Interface

Via the console port, administrators can enter the console interface to handle problems and situations occurred
during operation.
1. In order to connect to the console port of the HSG, a console, modem cable, and a terminal simulation program,
such as the Hyper Terminal are needed.
2. If a Hyper Terminal is used, please set the parameters as 9600, 8, None, 1, None.
Caution:
The main console is a menu-driven text interface with dialog boxes. Please use arrow keys on the keyboard to
browse the menu and press the Enter key to make selection or confirm what you enter.
3. Once the console port of the HSG is connected properly, the console main screen will appear automatically. If
the screen does not appear in the terminal simulation program automatically, please try to press the arrow keys
so that the terminal simulation program will send some messages to the system, and the welcome screen or
main menu should appear. If the welcome screen or main menu of the console still does not pop up, please
check the connection of the cables and the settings of the terminal simulation program.

Utilities for network debugging
The console interface provides several utilities to assist the Administrator to check the system
conditions and to debug any problems. The utilities are described as follows:
HSG Wireless Hotspot Gateway ENGLISH
104
User's Manual