Network Utility - 4IPNET HSG260 User Manual

User's Manual
HSG Wireless Hotspot Gateway ENGLISH

10.10 Network Utility

To configure Network Utility, go to: Utilities >> Network Utilities.
System provides some network utilities for administrators. Both IPv4 and IPv6 are supported.
Wake-on-LAN is for waking up remote devices that supports Wake-on-LAN feature by entering the MAC address
of the target device and then press Wake Up button.
Ping is to see whether a destination host is reachable and alive by entering the destination host's domain name or
IP address and then press Ping button.
Trace Route displays the actual route taken to reach the destination host. Entering the destination host's domain
name or IP address and then press Start button to see the route.
ARP Table is for displaying ARP information stored on the system.
101