4IPNET HSG260 User Manual page 72

Selecting the Filter Rule Number 1 as an example:
Rule Number: This is the rule selected "1". Rule No. 1 has the highest priority; rule No. 2 has the
o
second priority, and so on.
Rule Name: The rule name can be changed here.
o
Source/Destination – Interface/Zone: There are choices of ALL, WAN, Public and Private to
o
be applied for the traffic interface.
Source/Destination – IP Address/Domain Name: Enter the source and destination IP
o
addresses. Domain Name filtering is supported but Domain Host filtering is not.
Source/Destination – Subnet Mask: Select the source and destination subnet masks.
o
Source- MAC Address: The MAC Address of the source IP address. This is for specific MAC
o
address filtering.
Service Protocol: These are defined protocols on the service protocols list to be selected.
o
Schedule: When schedule is selected, clients assigned with this policy are applied the firewall
o
rule only within the time checked. There are three options, Always, Recurring and One Time.
Recurring is set with the hours within a week.
Action for Matched Packets: There are two options, Block and Pass. Block is to prevent
o
packets from passing and Pass is to permit packets passing.
HSG Wireless Hotspot Gateway ENGLISH
67
User's Manual