Tag-Based Service Zone
Tag-Based operation mode operates under the principle that different Service Zones are identified by VLAN ID.
This means that Tag-Based operation allows each physical LAN port to accept traffic for any enabled Service
Zones
Traffic handling will be processed internally according to the VLAN ID traffic packets carry.
Note:
System's WMI can also be accesses via WAN port as long as the administrator uses an IP address listed on the
Management IP Address List (Go to System >> General >> Management IP Address List). If both WAN and
LAN ports are unable to reach the WMI, please use console interface to resolve this issue.
HSG Wireless Hotspot Gateway ENGLISH
19
User's Manual