3.5.3 Configure Zone Network
To configure Zone network; go to: System >> Service Zone. Click the button Configure for Private zone for
further configuration. The parameter descriptions of Basic Settings for all four Zones are the same. The wireless
settings under each zone will be covered in the next section.
Network Interface:
o
Operation Mode: Contains NAT mode and Router mode. When NAT mode is chosen, service
zone runs in NAT mode. When Router mode is chosen, this zone runs in Router mode.
o
IP Address: The IP Address of this zone.
o
Subnet Mask: The subnet Mask of this zone.
DHCP Server: Related information needed for setting up the DHCP Server is listed here. To further
HSG Wireless Hotspot Gateway ENGLISH
21
User's Manual