4IPNET HSG260 User Manual page 12

HSG327
1
1
12V 2A
2 Restart / Reset
3 WES Button
4 LED Indicators
5 WAN
LAN Ports 1 – 2
6
2 3 4
Rear Panel
Power Jack Socket for the power adaptor.
Press once to restart the system; Press and hold for more than 5 seconds to
reset to factory default.
WDS Easy Setup. Press the button to build up a WDS link with another peer.
4 LED lights are available. What the numbers stand for is listed at the bottom of
the panel.
For attaching an Ethernet cable to an uplink service. PoE (Power over Ethernet)
is support for the WAN port.
Attach Ethernet cables here to connect to the wired local network.
HSG Wireless Hotspot Gateway ENGLISH
5 6
7
User's Manual